$289.53
Competition Class Mono Block Digital Car Amplifier
General Features
The Opti2000D is a discrete class D mono-block amplifier rated to make 700 watts RMS at 4ohm, 1100 watts RMS at 2ohms and 2000 watts Max at 11/42ohm. Total harmonic distortion (THD) is given as 0.1% at 1 watt, 4ohms. Lanzar has included exactly what you need for a huge subwoofer amplifier: a 24dB/octave lowpass crossover and 24dB/octave subsonic filter, phase reverse switch and dash-mounted remote gain control. If 2kW won't do the job you can strap two of these monsters together for an advertised max power of 4000-watts!
| Specifications | |
|---|---|
| Frequency Response: | 15Hz - 150Hz (+/-3dB) |
| Low Pass Filter: | 50Hz-150Hz, 24dB/Octave |
| @ 0.5 Ohms | 2000 Watts Max Power |
| Line Output Impedance: | 100 Ohm |
| Amplifier | Mono Block Subwoofer Amplifier |
| Variable Subsonic Filter: | 15Hz-40Hz, 24dB/Octave |
| THD @ 1Watt/4 Ohm: | 0.1% |
| Dimensions: | 10.08'' (W) x 2.12'' (H) x 19.1'' (L) |
| Variable Bass Boost: | 0 to 18dB |
| System | PWM (Pulse-Width-Modulated) System |
| @ 2 Ohms | 1100 Watts RMS Power |
| @ 1.3 Ohms | 1600 Watts RMS Power |
| @ 4 Ohms | 700 Watts RMS Power |
| S/N Ratio: | 90dB |
| @ 2 Ohms | 4000 Watts Bridge Max Power |
| Sold as : | Unit |
| Power Supply | MOSFET |
| Control | Remote Bass Control |
| Variable Phase Control: | 0 to 180 |
| Circuit Board | Double Sided Epoxy PCB Circuit Board |
| Inputs | Gold Plated RCA Inputs |
| Protection | Thermal, Overload Short Protection |
| @ 0.5 Ohm | Stable |
| Damping Factor @ 20Hz/4 Ohms: | 400 |
| Input Sensitivity: | 200mV ~ 8V |
| Input Impedance: | 10k Ohm |
| Fuse Rating: | 30A x 6 |