$399.95
KXM Series 2x200-Watt Two-Channel Full-Range Class D Marine Amplifier
General Features
KickEQ+™ delivers as much as an 18dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full range RCA output allows you to easily add another amplifier without running new signal cable to the radio.
Features:
- Class D Power Plant
- Gain Control With "Optimal Input" Indicator
- FIT2™ (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ+™ 18dB Variable Bass Boost
- ABYC/NMMA Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted Teal LED Light Pipe
- Stainless Steel Mounting Hardware Included
Want setup help? Go to KICKER U for a free woofer & amplifier configuration app!
This KXM amplifier delivers as much as 200 watts per channel (stereo) or 400 watts into one channel (mono). See below for more details.
| Specifications | |
|---|---|
| RMS Power [Watts] | @ 14.4V, 4? stereo, ≤ 1% THD+N : 100 x 2 @ 14.4V, 2? stereo, ≤ 1% THD+N : 200 x 2 @ 14.4V, 4? bridged mono, ≤ 1% THD+N: 400 x 1 |
| Length [in, cm] | 9-9/16 , 24.4 |
| Height [in, cm] | 2-1/8, 5.5 |
| Width [in, cm] | 8-5⁄16 , 21 |
| Frequency Response ± 1dB | 10Hz–20kHz |
| Signal-to-Noise Ratio [dB] | 95 |
| Input Sensitivity | 250mV-10V |
| Signal to Noise Ratio | Off Variable HP, 10-500Hz Variable LP, 40-500Hz; 400Hz–5,000Hz with 10X Switch (BP capable) Slope: 24dB/octave |
| KickEQ+™ Bass Boost | 0-18dB @ 40Hz |
| CEA Power | 100 x 2 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) |
| CEA Signal-to-Noise Ratio | -75dB CEA-2006B (ref: 1W, A-weighted) |
What's Included?
- 2-Channel amplifier
- 4 Self-tapping screws (2" length)
- 4 Flat washers
- 3mm Allen wrench
- Kicker Livin' Loud Performance Certificate
- Kicker 44KXMA4002 Owner's Manual
![]()
