$31.95
CS Series 6-1/2" 150W RMS (300W Peak Power Handling) 3-way Full Range Automotive Speakers
General Features
Specifications
- RMS POWER HANDLING(CEA426B)
150 watts - PEAK POWER HANDLING (CEA426B)
300 watts - SPEAKER IMPEDANCE
4 ? - FREQUENCY RESPONSE +/- 10DB
- FREQUENCY RESPONSE +/- 3DB
40 Hz - 22 kHz - SENSITIVITY (1 WATT/1 METER)
88dB - CROSSOVER POINT
4K Hz - CROSSOVER SLOPE
12dB - MOUNTING DIAMETER/CUT OUT
5.59 - OUTSIDE DIAMETER
7.01 - MOUNTING DEPTH/CHASSIS DEPTH
2.13 - PRODUCT DIMENSIONS
14.88 x 8.5 x 4.13 in
37.7 x 21.5 x 10.4 cm - PRODUCT WEIGHT
3.5 lbs (1.5kg)
Features & Benefits
- TWEETER DOME MATERIAL: Neo-Mylar Soft Dome Tweeter Impact Resistant Tweeter Elements
- SURROUND: UV Resistant Rubber Surround
Moisture Resistant Rubber Surround with high Mid-Bass Impact - CONE: Silver Alpha-Cellulose Poly Cones
Produces musical midrange and bass tones while remaining light weight - SURROUND / CONE COUPLING: High Temperature Adhesive
The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather - GASKET: Textured ABS
Assures a ridged linear seal to the mounting surface - TINSEL LEADS: Braided
Highly conductive while remain flexible during high power applications - VOICE COIL: Pure Copper
Creates strong magnetic field with a very thin extrusion - VOICE COIL FORMER: Kapton
Lightweight and efficiently dissipates heat - SPIDER: Epoxy infused Natural Fiber
Natural fiber allows flexibility while the epoxy which gives strength during the manufacturing process. - COOLING SYSTEM: Over-Coil
Air is exchanged over the voice coil through the spider - CROSSOVER TYPE: Passive Butterworth
Smooth transition of frequencies from midrange/midbass to the tweeter element - CROSSOVER SPECIAL: 6dB Internal
Integrated into the design to assure smooth midrange to tweeter frequency transitions - FRAME: Anti-Resonant Stamped Steel Basket
Very strong with minimal harmonics or distortions from flex or ringing - MOTOR: Ferrite Magnet
Creates a strong magnetic field while remaining small enough to fit nearly every application - CONNECTORS: Spade
Use spade connectors or solder direct for the best connection - GRILLS: Yes
Protects the speaker from accidental damage. Not used if speaker is mounted behind vehicle panel - TWEETER MATERIAL: Neo-Mylar Soft Dome
Great sound quality and increased reliability - TWEETER SIZE: 1 inch
Clear highs while handling plenty of power without sound harsh - TWEETER SURROUND MATERIAL: Kapton
Lightweight and efficiently dissipates heat