$42.45
CS Series 6-1/2" 150W RMS (300W Peak Power Handling) V-Drive Component Car Speaker System
General Features
Specifications:
- Rms Power Handling(Cea426b): 150 Watts
- Peak Power Handling (Cea426b): 300 Watts
- Speaker Impedance: 4
- Frequency Response +/- 10db
- 55hz-20khz
- Sensitivity (1 Watt/1 Meter) : 88db
- Crossover Point: 2k Hz
- Crossover Slope: 12db
- Mounting Diameter/cut Out: 5.59
- Outside Diameter: 7.01
- Mounting Depth/chassis Depth: 2.12
- Product Dimensions
- 16.63 X 7.88 X 4.38 In
- 42.2 X 20.0 X 11.1 Cm
- Product Weight: 4.65 Lbs (2.1 Kg)
Features & Benefits:
- TWEETER DOME MATERIAL: Neo-Mylar Soft Dome Tweeter Impact Resistant Tweeter Elements
- SURROUND: UV Resistant Rubber Surround
Moisture Resistant Rubber Surround with high Mid-Bass Impact - CONE: Silver Alpha-Cellulose Poly Cones
Produces musical midrange and bass tones while remaining light weight - SURROUND / CONE COUPLING: High Temperature Adhesive
The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather - GASKET: Textured ABS
Assures a ridged linear seal to the mounting surface - TINSEL LEADS: Braided
Highly conductive while remain flexible during high power applications - VOICE COIL: Pure Copper
Creates strong magnetic field with a very thin extrusion - VOICE COIL FORMER: Kapton
Lightweight and efficiently dissipates heat - SPIDER: Epoxy infused Natural Fiber
Natural fiber allows flexibility while the epoxy which gives strength during the manufacturing process. - COOLING SYSTEM: Over-Coil
Air is exchanged over the voice coil through the spider - CROSSOVER TYPE: Passive Butterworth
Smooth transition of frequencies from midrange/midbass to the tweeter element - CROSSOVER SPECIAL: External 12dB
Premium capacitors help create a smooth component system with exacting crossover points - FRAME: Anti-Resonant Stamped Steel Basket
Very strong with minimal harmonics or distortions from flex or ringing - MOTOR: Ferrite Magnet
Creates a strong magnetic field while remaining small enough to fit nearly every application - CONNECTORS: Spade
Use spade connectors or solder direct for the best connection - TWEETER HARDWARE: Included
Several mounting options are included to maximize installation placement - GRILLS: No
Use spade connectors or solder direct for the best connection - TWEETER MATERIAL: Neo-Mylar Soft Dome
Great sound quality and increased reliability - TWEETER SIZE: 1 inch
Clear highs while handling plenty of power without sound harsh - TWEETER SURROUND MATERIAL: Kapton
Lightweight and efficiently dissipates heat - MOUNTING HARDWARE OPTIONS: Included for tweeter
Several mounting options are included to maximize installation placement