JL Audio XDM800/8-24V

Image may be NSFW.
Clik here to view.

Features:

• Powerful Performance: Delivers 100 W x 8 channels at 2 Ω or 75 W x 8 channels at 4 Ω, utilizing advanced NexD™ high-speed switching technology for low distortion and high efficiency.

• Marine-Grade Durability: Built with marine-grade materials, ensuring long-lasting performance in harsh environments, suitable for both car and boat installations.

• Versatile Configuration Options:

  • Eight-Channel Satellite Amp: Drive four pairs of speakers with 75 W x 8 @ 4Ω.

  • Big Four-Channel Satellite Amp: Bridge to produce 200W x 4 @ 4Ω.

  • Six-Channel System Amp: Drive front and rear satellites with 75 W x 4 @ 4Ω, plus two 4Ω subwoofers with 200 W each.

  • Staggered Six-Channel Satellite Amp: Drive front speakers with 200 W x 2 @ 4Ω, plus four 4Ω speakers with 75 W each.

  • Staggered Five-Channel Satellite Amp: Drive three front speakers with 200 W @ 4Ω + rear speakers with 75 W x 2.

  • Four-Channel System Amp: Drive left and right speakers with 200W x 2 @ 4Ω, plus two 4Ω subwoofers with 200W each.

• Advanced Signal Processing: Features 12 dB/octave filters for each channel bank, configurable as low-pass or high-pass filters with variable cutoff frequency selection from 50-500 Hz.

• Remote Level Control Compatibility: Compatible with optional HD-RLC or MHD-RLC (water-resistant) remote level controllers, allowing easy adjustment of amplifier channels directly from the driver's seat or cockpit.

• Seamless Integration: Includes automatic turn-on capability via signal sensing or DC-offset sensing, ideal for factory system upgrades.

• Protected Design: Features a sleek black powder-coat finish with a gasketed, removable top cover that protects controls while ensuring easy access.

• 24V System Specific: Exclusively designed for 24V, negative-ground electrical systems, ensuring safe operation and preventing damage or voided warranty.

Specifications:

Power Specifications

• Rated Continuous (RMS) Power @ 28.8 V:
  • 75 W RMS x 8 @ 4 Ω
  • 100 W RMS x 8 @ 2 Ω
  • 200 W RMS x 4 Bridged @ 4 Ω
• Rated Continuous (RMS) Power @ 25 V:
  • 60 W RMS x 8 @ 4 Ω
  • 90 W RMS x 8 @ 2 Ω
  • 180 W RMS x 4 Bridged @ 4 Ω

General Specifications

• Frequency Response: 12 Hz - 22 kHz (+0, -1 dB)
• Signal-to-Noise Ratio (S/N), Referred to Highest Rated Power: >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Signal-to-Noise Ratio (S/N), Referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω: >150 @ 50 Hz
• Damping Factor @ 2 Ω: >75 @ 50 Hz
• THD+N @ Rated Power: <1% @ 2 Ω per channel
• Input Voltage Range @ RCA Inputs: 200 mV - 4 V RMS
• Minimum Copper Power/Ground Wire Gauge: 4 AWG wire
• Fuse Rating: 80 A (AFS, AGU, or MaxiFuse™)

Signal Processing

• Filter Modes: Low-Pass or High-Pass
• Filter Slopes: 12 dB/octave
• Filter Frequency Range: 50 Hz - 500 Hz
• Detented, Calibrated Filter Frequency Potentiometers: Yes
• Filter Defeat Function: Yes
• Remote Level Control: Optional HD-RLC or MHD-RLC (water-resistant)
• Remote Level Modes: 2, 4, or All Channels
• Channel Input Mode Switch: Yes (2/4/6/8 channels)
• Pass-Through Preamp Output: None
• Source Channel Selection for PreOuts: N/A

Physical Specifications

• Height (H): 2.05 in / 52 mm
• Width (W): 14.73 in / 374 mm
• Depth (D): 7.09 in / 180 mm