Completely Sealed front design prevents water intrusion.
Built-On Grille includes Tweeter Mount which eliminates the traditional tweeter "stalk".
Sealed Crossover Assembly is built Into Back of Magnet means there's no need to find room to hide an extra box.
Stainless Steel Heavy Duty Input Terminals and mounting hardware will not corrode or tarnish.
Passes The Most Rigorous 600 Hours of Salt Fog and UV Testing (ASTM International B117-03 Standard Practice for Operating Salt Spray (Fog) Apparatus and D4329-99 Standard
Dynamic Balance® Driver Technology for pure, distortion free sound.
Neodymium is a rare earth material we use in all MM driver magnets, excluding 461p, that are about 1/10 the weight of a comparable ceramic magnet and much more powerful.
Carbon Composite Basket based on the spokes of a wheel is lightweight and will not flex.
Woven Glass Composite Cones feature tremendous stiffness-to mass ratio. Lower mass means faster transients and finer detail.
Klippel Optimized Components for the best possible performance, even at extreme listening levels.
Marine Certified Polk MM Series speakers are built tough to withstand the toughest environments so they are perfect for use in boats of all types. That's why Correct Craft offers Polk Audio speakers in their award-winning Nautiques ski and wakeboarding boats.
Large-Diameter Voice Coil (30mm) increases reliability and power handling capacity.

↧

Polk Audio MM6501 UM

October 20, 2009, 6:33 am

≫ Next: Polk Audio MM1040-UM

≪ Previous: Polk Audio MM651 UM

$219.95
6-1/2" 250W 2-Way Mobile Monitor Series Ultra Marine Component Speaker System
General FeaturesGeneral Features

Woven glass composite cone woofer
Butyl rubber surround
1" Soft dome weather resistant tweeter
Stainless steel input terminals
Built-in sealed crossover assembly
Carbon composite basket
Marine certified
4 ohms impedance
1" Large voice coil
Neodymium magnet
Top-mount depth: 2-5/8"

General Details

Stainless Steel Heavy Duty Input Terminals and mounting hardware will not corrode or tarnish.
Sealed Crossover Assembly is built Into Back of Magnet means there's no need to find room to hide an extra box.
Passes The Most Rigorous 600 Hours of Salt Fog and UV Testing (ASTM International B117-03 Standard Practice for Operating Salt Spray (Fog) Apparatus and D4329-99 Standard
Dynamic Balance® Driver Technology for pure, distortion free sound.
Neodymium is a rare earth material we use in all MM driver magnets, excluding 461p, that are about 1/10 the weight of a comparable ceramic magnet and much more powerful.
Carbon Composite Basket based on the spokes of a wheel is lightweight and will not flex.
Woven Glass Composite Cones feature tremendous stiffness-to mass ratio and are weather resistant. Lower mass means faster transients and finer detail.
Klippel Optimized Components for the best possible performance, even at extreme listening levels.
Marine Certified Polk MM Series speakers are built tough to withstand the toughest environments so they are perfect for use in boats of all types. That's why Correct Craft offers Polk Audio speakers in their award-winning Nautiques ski and wakeboarding boats.
Large-Diameter Voice Coil (30mm) in drivers increases reliability and power handling capacity.

↧

Polk Audio MM1040-UM

October 20, 2009, 6:52 am

≫ Next: Polk Audio PA 250.2

≪ Previous: Polk Audio MM6501 UM

$169.00
10" 700W 4-Ohm SVC Mobile Monitor Series Ultra Marine Subwoofer
General FeaturesGeneral Features

Impedance: 4 Ohms
Polymer woofer cone and Butyl rubber surround are engineered to not break down over time due to marine environments
Heavy duty stainless steel input terminal will not corrode or tarnish over time
Will fit speaker wire up to 8 gauge or twisted pairs of 12 gauge
Marine certified
2" High temperature copper voice coil
Frequency response: 24-200 Hz
Sensitivity: 91

General Details

Dynamic Balance Driver Technology for pure, distortion free sound.
Polymer Woofer Cones and Butyl Rubber Surrounds will not break down over time and will survive the rigors of harsh marine environments.
High Temperature Copper Voice Coil (50mm) and Polyimide Former stands up to the most rigorous use while maintaining extremely low distortion for bass punch and output.
Heavy Duty Stainless Steel Heavy Duty Input Terminals will not corrode or tarnish. Will accommodate speaker wire up to 8 AWG or twisted pairs of 12 AWG.
Advanced Carbon Composite Basket based on the spokes of a wheel is lightweight, will not flex during peaks and looks great!
Klippel Optimized Components for the best possible performance, even at extreme listening levels. Available Matching Grille provides protection.
Marine Certified Built tough to withstand the toughest environments so they are perfect for use in boats of all types. That's why Correct Craft offers Polk Audio speakers in their award-winning Nautiques ski and wakeboarding boats. Passes The Most Rigorous 600 Hours of Salt Fog and UV Testing (ATSM B117-03 Standard Practice for Operating Salt Spray (Fog) Apparatus, and D4329-99 Standard Practice for Fluorescent UV Exposure of Plastics) ensures a long life on the boat.

↧

Polk Audio PA 250.2

October 21, 2009, 7:18 am

≫ Next: Polk Audio PA1100.5

≪ Previous: Polk Audio MM1040-UM

$135.00
250W RMS Class A/B 2-Channel PA Series High Performance Car Amplifier
General FeaturesPower Handling

75W x 2 @ 4-Ohms
125W x 2 @ 2-Ohms
250W x 1 [Bridged] @ 4-Ohms

Performance

125 watts x 2 (2 ohm) continuous power, 200 x 2 (2 ohm) dynamic power, or 250 x 1 (4 ohm) continuous power. CEA-2006 Compliant specifications for true, accurate power ratings.
2 ohm stable stereo operation is capable of driving virtually all automotive speakers.
High-speed MOSFET switching power supply and high current Bipolar Output Transistors pump maximum voltage and high current to your speakers or subwoofers.
Double Layer Fiberglass Epoxy Printed Circuit Boards for more rigidity, less shrinkage and a smaller overall amp footprint.
6-Way Smart System Protection (SSP) circuits

Functionality

Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency. Defeatable for full range (flat) operation.
Switchable 8 dB bass boost at 40Hz for extra bass thump.
Variable input gain optimizes match with different signal sources (250mv to 7.5V).
RCA Outputs for easy daisy chaining of other amplifiers.
Mounting hardware with rubber isolation grommets and extra fuse included.
Light Bar/Fan Output- Connect an optional LED light bar or cooling fan for custom installations.
Multi-Color Status LED gives instant information on amplifier operation.

↧

Polk Audio PA1100.5

October 21, 2009, 7:26 am

≫ Next: Polk Audio PA1200.1

≪ Previous: Polk Audio PA 250.2

$379.00
1100W RMS Class D 5-Channel PA Series High Performance Car Amplifier
General FeaturesPower Handling

80W RMS x 4 + 280W RMS x [Mono] at 4 ohms
125W RMS x 4 + 400W RMS x [Mono] at 2 ohms
250W RMS x 2 [Bridged] at 4 ohms + 600W RMS x [Mono] at 1 ohm

Performance

5-channel amplifier- enough for the entire system!
125 watts x 4 (2 ohm) and 600 x 1 (1 ohm) continuous power; 250 x 4 (2 ohm) and 1200 x 1 (1 ohm) dynamic power. CEA-2006 Compliant specifications for true, accurate power ratings.
2 ohm stable 4-channel operation and 1 ohm stable on mono subwoofer channel.
Super Efficient Class D Pulse-width modulation amplifier design.
High-speed MOSFET switching power supply and high current Bipolar Output Transistors pump maximum voltage and high current to your speakers or subwoofers.
Double Layer Fiberglass Epoxy Printed Circuit Boards for more rigidity, less shrinkage and a smaller overall amp footprint.
6-Way Smart System Protection (SSP) circuits

Functionality

Fully adjustable 12 dB/octave high or low-pass crossover is also defeatable for full range (flat) operation (front and rear channels only).
Switchable 24 dB/octave subsonic filter protects ported subwoofers (subwoofer channel only).
Switchable 8 dB bass boost at 40Hz for extra bass thump.
Variable input gain optimizes match with different signal sources (250mv to 7.5V).
Mounting hardware with rubber isolation grommets and extra fuses included.
Light Bar/Fan Output- Connect an optional LED light bar or cooling fan for custom installations.
Multi-Color Status LED gives instant information on amplifier operation.
Remote Subwoofer Level Adjuster for subwoofer channel included.
RCA output (subwoofer channel only) for easy daisy chaining of other amplifiers.

↧

Polk Audio PA1200.1

October 21, 2009, 8:30 am

≫ Next: Polk Audio db351

≪ Previous: Polk Audio PA1100.5

$319.00
1200W RMS Class D Monoblock PA Series High Performance Car Amplifier
General FeaturesPower Handling

400W RMS x 1 at 4 ohms
800W RMS x 1 at 2 ohms
1200W RMS x 1 at 1 ohms

Performance

Monoblock amplifier for subwoofer use and particularly ideal for the SR Series.
1200 watts x 1 (1 ohm), 800 watts x 1 (2 ohm) and 400 watts x 1 (4 ohm) continuous power. CEA-2006 Compliant specifications for true, accurate power ratings.
2400 watts x 1 (1 ohm) dynamic power.
1 ohm stable design can drive even the most demanding subwoofers.
Super Efficient Class D Pulse Width Modulation amplifier design. Draws less power and runs cooler so you won't heat up the inside of your vehicle or make the headlights dim.
High-speed MOSFET switching power supply and high current Bipolar Output Transistors pump maximum voltage and high current to your speakers or subwoofers.
Double Layer Fiberglass Epoxy Printed Circuit Boards for more rigidity, less shrinkage and a smaller overall amp footprint.
6-Way Smart System Protection (SSP) circuits

Functionality

Anodized extruded brushed-aluminum cover for maximum heat dissipation and great looks!
Cast aluminum textured end caps for optimized heat dissipation and hiding of connectors. Solid aluminum logo and model panel back lit in cobalt blue.
Adjustable 12 dB/octave low-pass crossover (30-250 Hz).
Switchable 8 dB bass boost at 40Hz for extra bass thump.
Variable input gain optimizes match with different signal sources (250mv to 7.5V).
Switchable 24 dB/octave subsonic filter protects ported subwoofers.
Switchable 180° phase inversion for easy sub to main integration or external bridge mono operation.
Mounting hardware with rubber isolation grommets and extra fuses included.
Light Bar/Fan Output- Connect an optional LED light bar or cooling fan for custom installations.
Multi-Color Status LED gives instant information on amplifier operation.
Remote Subwoofer Level Adjuster included.
Master/Slave switch and RCA Outputs for easy daisy chaining of other amplifiers.
Master/Slave switch allows parallel operation- master amp's gain and crossover settings will be duplicated in "slave" amplifiers for consistent, repeatable settings.
Power and ground terminals accept bare wire up to 4 AWG. Terminals use standard #2 Phillips head screwdriver- no more hex wrenches to lose or strip!

↧

Polk Audio db351

October 21, 2009, 8:30 am

≫ Next: Polk Audio db401

≪ Previous: Polk Audio PA1200.1

$39.00
3-1/2" 105W 2-Way db Series Coaxial Car Speakers
General Features

The db351 is a great in-dash or rear seat speaker. It's compactness makes it an easy fit, but it's big on all the Polk technology that makes it uniquely db: meaning you get legendary Polk sound at a terrific price

Power Handling

105W Max
4-35W Rated Power

General Features

Dynamic Balance Driver Technology for pure, distortion free sound.
Neodymium is a rare earth material we use in all db driver magnets, excluding 461p, that are about 1/10 the weight of a comparable ceramic magnet and much more powerful.
Composite Cones feature tremendous stiffness-to mass ratio. Lower mass means faster transients and finer detail.
Klippel Optimized Components for consistent, distortion-free sound.
Marine Certified means the db351 is built tough to withstand the harshest environments on the water.
Priced per pair

↧

Polk Audio db401

October 21, 2009, 8:32 am

≫ Next: Polk Audio db461

≪ Previous: Polk Audio db351

$49.00
4" 135W 2-Way db Series Coaxial Car Speakers
General Features

The db401 is an easy install in a door or in a dash. It's compactness makes it an easy fit, but it's big on all the Polk technology that makes it uniquely db: Legendary Polk sound at a terrific price.

Power Handling

135W Max
4-45W Rated Power

General Features

Dynamic Balance Driver Technology for pure, distortion free sound.
Neodymium is a rare earth material we use in all db driver magnets, excluding 461p, that are about 1/10 the weight of a comparable ceramic magnet and much more powerful.
Composite Cones feature tremendous stiffness-to mass ratio. Lower mass means faster transients and finer detail.
Klippel Optimized Components for consistent, distortion-free sound.
Marine Certified means the db4611 is built tough to withstand the harshest environments on the water.

↧

Polk Audio db461

October 21, 2009, 8:33 am

≫ Next: Polk Audio db461p

≪ Previous: Polk Audio db401

$49.00
4" x 6" 120W 2-Way db Series Coaxial Car Speakers
General Features

Perfect for dashboard installs, the db461 is a coaxial the produces great sound pure and simple. Like all db loudspeakers, the db461 is a refinement that keeps raising the standard for incredible sound at an affordable price.

Power Handling

120W Max
4-40W Rated Power

General Features

Dynamic Balance Driver Technology for pure, distortion free sound.
Neodymium is a rare earth material we use in all db driver magnets, excluding 461p, that are about 1/10 the weight of a comparable ceramic magnet and much more powerful.
Composite Cones feature tremendous stiffness-to mass ratio. Lower mass means faster transients and finer detail.
Klippel Optimized Components for consistent, distortion-free sound.
Marine Certified means the db461 is built tough to withstand the harshest environments on the water.

↧