Sony CDX-GT540UI

November 2, 2009, 10:23 am

$109.00
In-Dash CD/MP3/WMA/AAC/ATRAC3plus Receiver with Front Aux input and USB 1-Wire Connection for iPod/iPhone
General Features

CD Text Display : CD and MP3 / WMA data displayed
Disc Capacity : 1
Illumination : Blue
On-Screen Clock : 12H
CD : CD, CD-R / CD-RW (MP3 / WMAfiles)
12V Trigger Output(s) : Power antenna Amplifier turn on
Antenna Terminal(s) : Aerial Input Terminal
Audio In : Front Aux input with variable level: -8dB ~ +18dB Front USB input Sony Bus audio/controll terminal
Digital Audio Input(s) : -Ability to use all forms of USB devices may vary as not all devices are compatible. This unit can be connected to the following iPods. Update your iPod to the latest software before you use it. -iPod Nano 1st generation* -iPod Nano 2nd generation (aluminum) -iPod Nano 3rd generation (video) -iPod 5th generation (video)* -iPod Classic -iPod Touch -iPhone When you connect iPod Nano1st generation or iPod 5th generation, Passenger Control is not available. -This unit is compliant with MSC (Mass Storage Class) and MTP (Media Transfer Protocol) type USB devices compliant with the USB standard. -This unit cannot recognize USB devices via a USB hub. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.
Infrared Port : Wireless remote
RCA Audio Output(s) : Front and Rear/Sub selectable RCA pre-amp outputs
Tilt Range : 45°
Current Drain : 3 - 5 amps
Input Voltage : 12 V DC car battery (negative ground)
Output Power : 52W x4 High Power - 17 watts per channel minimum continuous average power into 4 Ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion.
Power Consumption (in Operation) : 45w
Color : Gun Metallic / Black
Remote Jack : Optional wired remote terminal
USB Port(s) : Front USB - Full Speed
Max power output : 52 watts x 4 at 4 ohms
Speaker Impedance : 4-8 Ohms
Band : AM / FM
CD Playback : CD, CD-R / CD-RW (MP3/WMAfiles)
Digital-to-Analog Converter : 24bit
Frequency Response : CD: 10-20,000 Hz
Preout Impedance : 220 ohms
Preout Voltage : 2 volt
Signal-to-Noise Ratio (dB) : CD: 120 dB
Station Preset(s) : 18 FM / 12 AM
Tone Control(s) : Low +/- 10 dB at 60 Hz Mid +/- 10 dB at 1 kHz High +/- 10dB at 10 kHz
Tuner Frequency Range : FM:Tuner Frequency Range(MHz): 87.5-107.9, AM:Tuner Frequency Range(kHz): 530-1710
Tuner Type : SSIR-EXA with RDS
Volume Control : Tel/Nav Attenuation Circuitry
Wow and Flutter : Below measurable limit
FM Usable Sensitivity : 10 dBf
Frequency Response : FM: 20-15,000 Hz
S/N Ratio : 70 dB (mono)
Selectivity : 75 dB at 400 kHz
Stereo Separation : 40 dB at 1 KHz
Dimensions (Approx.) : 178 x 50 x 179mm
Weight (Approx.) : 1.3Kg

↧

Kenwood KFC-XW800F

November 10, 2009, 9:32 am

≫ Next: MTX Terminator TNP112D

≪ Previous: Sony CDX-GT540UI

$99.00
Shallow 8" 1400W 4-Ohm Car Subwoofer
General FeaturesPower Handling

600W Peak Power
150W Rated Power

General Features

Carbon-glass fiber composite cone woofer
Butyl rubber surround
Super linear spider for maximum control over the woofer's linear motion
Dual magnet drive
Removable gasket
Heat transfer system designed to provide ventilation to keep the woofer cool
Aluminum-cast basket for long-lasting reliability
Frequency response: 40 - 500 Hz
Sensitivity: 78 dB

↧

MTX Terminator TNP112D

November 24, 2009, 9:22 am

≫ Next: MTX TE604

≪ Previous: Kenwood KFC-XW800F

$165.00
Amplified Bass System With One 12" Terminator Subwoofers In a Sealed Enclosure
General FeaturesTNE112D 12" Component Car Subwoofer Driver

200W RMS
600
Single 4 ohms
2" Aluminum voice coil
Rubber Surround
Polypropylene Cone
MTX Audio Logo on Dustcap
48oz. Magnet
Frequency response: 37-150 Hz

TN201 Terminator Series Class D Monoblock Car Amplifier

120W RMS x 1 @ 4 Ohms
200W RMS x 1 @ 2 Ohms
400W Max X 1
LED power and protection indicators
Variable bass boost (0-18 dB at 40 Hz)
Mono gain control
Smart engage auto turn-on circuitry
Variable low-pass filter (50-250 Hz, 18 dB/octave)
Variable high-pass filter (50-250 Hz, 18 dB/octave)

Enclosure Features

Single 12" Vented Sub Enclosure
5/8" MDF Solid Construction
Durable Black Carpeting
Dimensions: 15-3/4"H x 21-1/4"W x 17-1/4"D

↧

MTX TE604

December 1, 2009, 9:41 am

≫ Next: JL Audio M10W5-CG-WH

≪ Previous: MTX Terminator TNP112D

$339.00
1200W 4 Channel Class A/B Thunder Elite Series Car Amplifier
General Features

80W RMS x 2 @ 4 ohms
150W RMS x 2 @ 2 ohms
600W RMS x 1 [Bridged] @ 4 ohms

Semi Unregulated MOSFET
Remote bass level input (remote level control sold separately)
Dual Mono Output
Overload and Thermal Protection
High Level with Smart Engage Auto Turn-on RCA Input
Input Select 2/4 Channel
Prizm EFX Lighting
Xtant Technologies Cooling: Thermal-regulated, turbo charged, intercooler
Bi-Level RCA Inputs (high/low)
Variable high-pass filter (40-350 Hz, 24 dB/octave)
Variable low-pass filter (40-350 Hz, 24 dB/octave)

↧

JL Audio M10W5-CG-WH

December 15, 2009, 8:39 am

≫ Next: Pioneer DEH-1200MP

≪ Previous: MTX TE604

$189.00
10" 500W 4-ohm SVC Marine Subwoofer Driver with White Classic Grilles (White)
General FeaturesPower Handling

Max: 500W
RMS: 250W

General Features

Impedance: Single 4 ohms
Injection molded mica filled polypropylene cone woofer
Synthetic rubber surrounds with UV treatment to withstand harsh marine environment
Centrex polymer basket provides additional UV and corrosion protection
Marine tested synthetic fiber spiders with progressive roll designs
Gold-plated brass terminals
Includes stainless steel mounting hardware
Designed for extremely long linear excursion for maximum bass with minimal distortion
Optimized for multiple mounting configuration and setup
DMA (Dynamic Motor Analysis) technology further enhances bass output with minimal distortion
Vented design with stainless steel heat diffuser for excellent voice coil cooling at optimal or high levels
Sensitivity: 87 dB

↧

Pioneer DEH-1200MP

December 16, 2009, 6:43 am

≫ Next: Directed CHALL

≪ Previous: JL Audio M10W5-CG-WH

$87.00
CD/MP3/WMA/AAC Receiver with Remote Control and AUX Input
General Features

CD-R/CD-RW/MP3/WMA Playback
LCD Display with 8-character Text
3-Band Equalizer (High/Mid/Low)
Large Rotary Volume control
Detachable Face Security (DFS)
RCA preout for adding on external amps and speakers simplify system expansion.
Detachable Face Security
Rotary Volume Control
Cross-Key Operation
Front Auxiliary Input
Remote Control included

Tuner Features

AM/FM Radio
Tuner Type: Supertuner IIID
24-Station/6-Button (18FM/6AM) Presets
BSM (Best Stations Memory)
Selectable Local Station Setting Function

CD Player Features

CD-R/CD-RW Compatible
1-bit D/A Converter
AGC (Automatic Gain Control)
CD Text Display

Display Features

Slot Loading CD Mechanism
LCD Display
1 Line, 8 Character Dot Matrix OEL Size
Green Button (Key) Illumination

Audio Features

Built-in MOSFET 50W x 4 amplifier (22W x 4 rated power
1 Pair RCA Pre-outs
2.2V Preout Voltage @ 1k Ohms
Bass, Mid, Treble Equalizer with 5 EQ Pre-sets (1 Custom user EQ setting)
Loudness
Electronic Balance/Fader
Source Level Adjuster (SLA)

↧

Directed CHALL

January 11, 2010, 7:20 am

≫ Next: Tview LS2007C

≪ Previous: Pioneer DEH-1200MP

$65.00
Xpresskit Plug and Play Door Lock and Override for all 2004 to 2010 Chryslers
General Features

CHALL is a data bus module that controls the door locks, factory security, transponder key override (In data) and sliding doors / power hatch. what makes this unit special is that it comes with a T harness for super fast and highly reliable "Plug and play" installation. The module is full 2 way D2D compatible with any DEI remote starter and only requires a single key to program it. (No key required to operate) the CHALL will also cover the new generation of "Tip start" models such as the Charger, Challenger and Ram. Fully flashable and upgradeable but comes with all software pre-loaded for quick and easy "out of the box" installs.

Only one key required to program the module and no key to operate.
No transponder used in vehicle, more secure!
T-Harness for can type included in kit. Reduced installation time using T-Harness
No soldering or cutting to OEM harness.

CHALL covers all models from 2004 to 2010, there is a second "MUX" style T harness required for certain models such as the Nitro, Wrangler & Caliber.

Dodge Sprinter currently not supported
Non 2-way Data-Link compatible remote starters require additional analog connections to the CHALL
Older Chrysler vehicles that do not utilize CAN Bus communication require analog connections. See vehicle compatibility guide for details

↧

Tview LS2007C

January 20, 2010, 6:23 am

≫ Next: Kicker ZX450.2

≪ Previous: Directed CHALL

$59.00
Plate Mount Rear View (BackUp Camera)
General Features

Image Senssors: 1/3" CCD Color
Effective Pixesl: 638x582/512x492
Sensing Ares (mm):4.9x3.7
Resolution (TV Lines: 420
Dimensions: 190x28x23mm

↧

Kicker ZX450.2

January 22, 2010, 7:29 am

≫ Next: Kicker ZX500.1

≪ Previous: Tview LS2007C

$195.00

450W RMS A/B Class ZX Series 2-Channel Stereo Car Amplifier (ZX450.2)

General Features

Power Handling

225W X 2 @ 2-Ohms
420W X 1 [Bridged] @ 4-Ohms

General Features

Balanced differential inputs for noise elimination and factory-radio compatibility
3 automatic turn-on modes
+18dB of boost centered at 40 hertz
Optional end caps available
Optional vinyl skins for personalizing heat sinks available
KICKER Amp’s actual power always exceeds its rated power, documented inside each carton
ZXRC Remote Bass Control capable (sold separately)

General Specifications

Frequency Response: 20Hz-20kHz, +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 12dB/octave, variable 50Hz-200Hz selectable high pass, low pass, or all pass
KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz
Height: 2-1/8", Width: 9-5/8", Length: 16-3/4

↧

Kicker ZX500.1

January 22, 2010, 7:34 am

≫ Next: Kicker ZX350.4

≪ Previous: Kicker ZX450.2

$245.00

500W RMS D Class ZX Series Mono Subwoofer Car Amplifier (ZX500.1)

General Features

General Features

Balanced differential inputs for noise elimination and factory-radio compatibility
3 automatic turn-on modes
+18dB of boost centered at 40 hertz
Optional end caps available
Optional vinyl skins for personalizing heat sinks available
KICKER Amp’s actual power always exceeds its rated power, documented inside each carton

General Specifications

Frequency Response: 25-200Hz, +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
24dB/octave high-pass subsonic filter fixed @ 25Hz
KICKEQ Boost: Variable to +18dB, centered @ 40Hz
Height: 2-1/8", Width: 9-5/8", Length: 12"

↧

Kicker ZX350.4

January 22, 2010, 7:39 am

≫ Next: Jensen Power 1050

≪ Previous: Kicker ZX500.1

$169.00

350W RMS A/B Class ZX Series 4-Channel Car System Amplifier (ZX350.4)

General Features

General Features

Balanced differential inputs for noise elimination and factory-radio compatibility
3 automatic turn-on modes
+18dB of boost centered at 40 hertz
Optional end caps available
Optional vinyl skins for personalizing heat sinks available
KICKER Amp’s actual power always exceeds its rated power, documented inside each carton

General Specifications

Frequency Response: 20Hz-20kH, +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 12dB/octave, variable 50Hz-200Hz, selectable high pass, low pass, or all pass
KICKEQ Boost: Variable to +18dB, centered @ 40Hz
Height: 2-1/8", Width: 9-5/8", Length: 13-1/2"

↧